What is The Dyson Vacuum Fuse Location 

Nearly all kinds of electrical appliances come with a fuse that protects against overcurrent in the device thus saving the appliance from burning. Does your Dyson vacuum cleaner have a fuse? Let’s find out!

According to Dyson’s Support Team, all corded Dyson vacuum cleaners that are available in the UK market come with a 13 amp fuse. Note that this fuse is also replaceable. However, markets operating outside the UK may or may not have Dyson vacuum cleaners that come with a fuse.

Now, where’s the fuse on a Dyson vacuum located? Read below to find out!

Does your Dyson Vacuum Cleaner come with a Fuse?

Yes, it does! Almost all electrical appliances come with a built-in fuse.

Your Dyson vacuum typically comes with two fuses, one is used for protection against faults whilst the other one is used for protection against overheating.

The first fuse provides your vacuum cleaner protection against electrical damage which includes short circuits or power surges. These fuses generally come in handy if you’re living in a place where voltage fluctuation is common.

The second fuse is a “thermal fuse”, that protects your vacuum cleaner’s motor. Your Dyson vacuum cleaner may get heated due to many factors, blockages or clogs being one of them.

 In such a case, this fuse instantly powers down your device to prevent any possible damages that can occur to your vacuum cleaner’s motor and surrounding components.

If your electrical appliance doesn’t have a built-in fuse inside the plug, don’t worry because Dyson models which lack this feature come with a thermostat, which is designed to turn your vacuum cleaner off when it starts to overheat.

Where is the Fuse on a Dyson Vacuum?

Requirements 

• Torx Screwdriver 

Dyson Fuse Location – Step-by-Step Guide

Here are the steps you’ll have to follow to find out the fuse location on your Dyson vacuum:

• Disconnect your vacuum cleaner from the power outlet.
• Place your Dyson vacuum cleaner in the upright position.
• Disconnect the wand from your vacuum cleaner.
• Use your Torx Screwdriver to remove the two bolts attached to the wand compartment.
• After the removal of the two bolts, you’ll find four thrust fasteners. Unscrew them and carefully remove the control board from your vacuum cleaner.
• You’ll be seeing two buttons now, where one is for power and the other is for your vacuum cleaner’s brushes.

• Press the power button downwards to discharge it. Afterward, you’ll be able to locate the fuse location on your Dyson vacuum.

Looking for a replacement fuse to fit in your Dyson DC05 – DC08 model? You can find them here. 

Fuse can be one of the reasons why your Dyson is cutting out, to find other reasons visit the below-given link.

Why my Dyson is Overheating and Cutting Out?

Dyson Vacuum Overheating – Troubleshooting Guide

Dyson vacuums are a must-have for all the “neatniks”, however, they can suffer various sorts of malfunctions due to several factors. One such issue is related to overheating, which I’ll be discussing below.

Following are possible reasons why your Dyson vacuums are overheating and how you can overcome them:

Is Your Vacuum’s Canister Full?

Blockages are, almost every time, the root cause when it comes overheating of vacuum cleaners. So, the possible case for the overheating of your Dyson vacuum cleaner may arise if you haven’t emptied its bag or canister yet.

This can not only damage your Dyson’s motor – but also the surrounding components, and the damage caused can be quite serious as well.

The solution to this problem is rather simple, all you have to do is empty your Dyson bag or canister regularly. 

Dusty Filters 

Dirty filters play a significant role in your current problem, particularly because they’re responsible for sucking in all the dust, debris, and allergens. However, when they get clogged with dirt, their efficiency is severely reduced, leading to your vacuum cleaner getting overheated.

Generally, to clean a Dyson vacuum cleaner, you’ll have to take out the filters and wash out the debris with cold water and let it dry out thoroughly for some time. 

However, this may not be the best method to clean the filters of your Dyson model, since these methods vary depending on the model you possess. So it’s viable to browse the accurate method to clean the filters for your Dyson model before using the method mentioned above.

Can’t find the perfect filter for your Dyson? Don’t worry, we’ve got you covered! Here are The Top 10 Verified Dyson Vacuum Filters.

Why Does Your Dyson Vacuum Turn Off After a Few Seconds?

This problem is reported by a ton of Dyson users previously. The turning off of your Dyson vacuum cleaner is also connected to overheating. 

Blockages, in the form of dust buildup, can reduce the efficiency of your electrical appliance.

Blockage restricts the amount of airflow thereby causing your appliance to overheat after a few minutes of usage.

The “thermal mechanism” present inside your Dyson vacuum senses this rapid change in heat.

After high temperature is observed your vacuum cleaner turns off.

It avoids potential damage to the vacuum motor and other electrical components.

It is basically a safety mechanism to help avoid any further loss to your appliance. 

The only viable solution to this problem is to check your vacuum’s parts.

Such as the hose or wand and eliminate them by using a rod-like structure.

After that you’ll have to clear out the microparticles with the help of water and leave them to dry, for a day at least.

Other causes include faulty electrical components, typically the belt. To fix this problem, you’ll have to inspect your vacuum for any faulty components.

Then get them replaced to make sure your vacuum functions properly.

Conclusion

The fuse is a vital component of any Dyson vacuum cleaner as it is responsible for cutting off power and saving the appliance in case of overheating.

The fuse location in your Dyson vacuum comes in handy with the idea that it can be easily found and replaced when needed.