Accidentally Vacuumed Water With Dyson – How To Fix It?

It’s a common issue that users accidentally vacuum water with their Dyson. Though this issue may be fixable, depending on how much water the vacuum sucks, people end up panicking like crazy!

Generally, you can fix your Dyson if a small amount of water has been sucked up. However, to do so, you’ll have to follow a few instructions that shouldn’t take much time. 

I know you’re in distress after seeing your old partner suffer like this, but not to worry because we’ll be telling you exactly how to fix your vacuum cleaner after it ends up sucking water. Let’s begin!

Do All Vacuum Cleaners Get Damaged With Water?

It all comes down to the vacuum cleaner you use!

For instance, traditional vacuum cleaners aren’t meant to suck up water. However, if you have a dry-wet vacuum cleaner in your possession – you’ll be fine. 

Continue reading below if your vacuum has accidentally sucked up water!

What Happens When Water Gets Into a Vacuum Cleaner?

Typically, the water can cause damage to the vacuum’s motor. This can cause the main motor to malfunction, leaving your vacuum cleaner unable to suck up dirt, dust, or allergens. 

It can pose a safety hazard! Therefore, it’s always advised to switch off the machine completely if you notice that it has sucked up the water.

Can I Fix My Vacuum Cleaner After It Has Sucked Up Water?

Yes, you can fix it!

However, it all depends on how much water your Dyson vacuum cleaner has ended up sucking. A few milliliters of water should not harm the machine much, considering you follow our step-by-step guide below!

But, if the vacuum ends up sucking quite some water, it will damage the motor, and you’ll have to replace the motor or the vacuum cleaner.

How to prevent water damage with a Dyson vacuum?

Here’s a list of places you might need to avoid vacuuming in the future to prevent accidentally cleaning up water spills with Dyson.

• Bathroom
• Kitchen
• Pet Waterers 
• Broken drinking glasses
• Recently-mopped floors (You can safely vacuum by using a dry cloth to clean up the bulk of water.)

These are just a few. Feel free to add more!

How To FIX Accidentally Water-Damaged Vacuum Cleaners?

If your vacuum has ended up sucking water, here’s what you can do to fix Dyson after vacuuming water:

• Switch off the device instantly!
• Take the dustbin out, and empty it. Afterward, let it dry.
• Thoroughly dry or replace your vacuum cleaner’s filters, the wet, or dry filters can hinder the suction and potentially cause damage to the motor. 
• Bagged vacuum cleaners require you to remove and replace dust bags. You can just empty them and let them dry too, but let’s not take any chances here!
• Open up the chamber (casing) of your vacuum cleaner. 
• Clean all the areas of the vacuum cleaner, and let it dry for at least two days. 

FAQ’s

Can you vacuum water with a Dyson vacuum cleaner?

I can guess you are trying to test the capabilities and limitations of your Dyson. Briefly answer is NO, Dyson’s aren’t designed to handle water and liquid spills.

Why can’t you vacuum water with Dyson?

Dyson vacuums use a very strong motor to generate suction, hence it’s obvious that liquids can get to the motor when sucked and causing it to malfunction and even a safety hazard. 

Can I use a wet/dry vacuum to clean up the water instead?

Yes, wet/dry shop vacs have special components, making it easier and safe to handle liquid messes. Their working mechanism is altogether different from regular vacuums. 

You can learn how to properly use a vacuum that sucks up water.

Conclusion

It can cause quite a panic when your Dyson vacuum cleaner accidentally ends up sucking water. However, don’t worry since you can still handle this issue! But it all depends on how much water your vacuum cleaner has sucked up.

If you’re stressing about Dyson vacuum and water accidents, I suggest you read the guide above. Why? Well, because we’ve covered all the details. From the issues that arise when a vacuum sucks up water to its DIY solutions.